Carbon Block water Pre-Filter
Today's water is not as pure as it used to be, there is an ever-increasing amount of foreign contaminants found in tap water. It is becoming important to filter this water before filling your hot tub, fish tanks, kiddie pools & spas.
Initial chemical balancing becomes easier and future stain and scale issues are greatly minimized.
Using a water pre-filter will dramatically extend the life of spa filter elements.
If your spa has a bromine generator it is important to use a pre-filter.
Pre Filters Reduce:
Suspended solids to .5 microns,
Tanning Oils and Organic Debris,
Metals and inorganic's such as:
| phosphates | chlorine | iron |
| dust | tastes | lead |
| rust | odors | copper |
| grit | cloudiness | iron oxide |
| dediment | colors | V.O.C.'s |
| arsenic | aluminum | mercury |
| cadmium | H2S | vapors |
Easy to use directions!
Step 1. Attach Filter to any standard garden Hose
Step 2. Turn Hose on and fill to the appropriate level
Step 3. Balance the Ph and Alkalinity
*Replace the Filter when it is Full and restricts water.
Spa filter cartridges should always be replaced regularly..
ReplyDeleteThanks for sharing your views regarding spa filter elements. It is correct that water is not pure so it is very important to filter water before filling pool or tub. There are many equipments available here for filtering the water. To get more information about these spa filters, pool filters, visit here: www.poolfilters.biz.
ReplyDelete